Type Trumpf
Advantages
- Optimum materials
- 42 CrMo4, tempered to 1100–1200 N/mm2
- 1.2312, tempered to 950–1100 N/mm2
- C45, tempered to 800–850 N/mm2
- C45
- Bending radius/intake radii, hardened up to 52–55 HRC =
- Precision ground =
- Guaranteed exchangeability
- Parallelism
- Punch/top-tool clamping in two different models
- Simple Clamp
- Safety pin
- Self centering
- Usable on both sides
- Via adaptor-systems applicable on all other press brakes
- Tool marking with all significant information
Horn extensions
- Horn extensions for sectionalized punches/top-tools UKB-System B
- You find the exact measurements of the horn extensions in the drawing next to the punches/top-tools
Punch/top-tool clampings and tool lengths
Punch/top-tool clamping UKB-System B is available in two different models.
Punches/top-tools with Simple Clamp
Length 500 mm
Length 300 mm
Length 200 mm and 100 mm
Length 550 mm sectionalized
- Sectionalized punches/top-tools are delivered as a complete set
- 10 Segments
(100 Horn left, 25, 25, 30, 35, 40, 45, 50, 100, 100 Horn right)
Punches/top-tools with Safety Pins
Length 500 mm
Length 300 mm
Length 200 mm and 100 mm
Length 550 mm sectionalized
- Sectionalized punches/top-tools are delivered as a complete set
- 10 Segments
(100 Horn left, 25, 25, 30, 35, 40, 45, 50, 100, 100 Horn right)
Flexible modification of punches/top-tools
Enhance your production with our flexible modification options!
Maximum flexibility, individual variants - and all that within one working day!
- Special cuttings
- Individual horn extensions
- Insertion of Simple Clamp
- Insertion of Safety pins
- Laser marking
- Other modifications
- information see Modification
Tool lengths
Dies
Length 500 mm
Length 300 mm
Length 200 mm and 100 mm
Length 550 mm sectionalized
- Sectionalized dies are delivered as a complete set
- 9 Segments
(25, 25, 30, 35, 40, 45, 50, 100, 200)
Flexible modification of dies
Enhance your production with our flexible modification options!
Maximum flexibility, individual variants - and all that within one working day!
- Special cuttings
- Laser marking
- Other modifications
- Information see Modification
Insertion of a steel insert
By milling a 2 mm groove and mounting of a ground steel insert (13 x 22 mm) dies UKB-System A can be used on press brakes UKB-System B.
See Modifications
